Roller hemming EDHS 130° Twinstep
Our Roller hemming systems are a cost-efficient alternative to conventional pressing because of their lower investment and maintenace cost and their shorter developement and completion.
Dear Visitor,
to experience our EDAG Newsflash, the latest Adobe Flash Player has to be installed.
You can download and install the latest Flash plugin now.
Click here and follow the instructions.
The EDHS 130° Twinstep is a Roller hemming tool that employs two rollers which are positioned in line. The first roller is closes the flange partially and the second is finishes it. Within one path, two steps can be realised. A second path need not to be applied
Advantage
The Twinstep integrates the advantages of the EDHS 130° Single together with a significant reduction of the cycle time with the same or even less equipment!
Einsatzgebiet
- Regular flanges
- Drop shaped flanges
Features
- Feed averages between 150mm/sec to 450 mm/sec
- Regular flanges with starting angle < 95° => 1 path
- Regular flanges with starting angle > 95° => 2 path
- Availability together with robot >99,8%
- Standardized system
- Lowest maintenance
- High Quality due to fixed system at pre-hemming, system with suspension at final hemming
- Part quality can be influenced by adjusting the robot program
- Force-control for easy robot-program verification, quality check,process-monitoring and quick start up
- Cycle time of EDAG system-solution as required from <30sec/part with only one single robot
You can request tool STEP-DATA for your projecting edges studies.
CONTACT
Your partner for more information on Roller hemming:
Christian Körbel
Key Account Manager
Tel.: +49 661 2926-535
Email